Tubular Centrifuges
ROTA-TC12 with Direct Drive
The ROTA-TC12 is a high-performance tubular centrifuge designed for the efficient separation of components in liquid mixtures. Operating on the principle of centrifugal force, its cylindrical rotor spins at high speed to separate substances based on their density: heavier particles are driven to the outer wall of the tubes, while lighter liquids remain closer to the center.
With a processing capacity ranging from 5 to 3000 liters per hour, the ROTA-TC12 is suitable for both laboratory research and large-scale industrial production. Tubular centrifuges are widely used across industries such as biotechnology, pharmaceuticals, food processing, and environmental technology, making this model a versatile and reliable solution for solid-liquid and liquid-liquid separation.
Beltless
Less Operational Noise
Increased Efficiency
Reduced Maintenance
Improved Reliability
Easy to Use
Main Machine Features
Direct drive (beltless) motor
Permanent Magnet rotor drive
Two phase separation: solid and liquid/liquid and liquid
Designed for Grade “C” clean room
Cooling Jacket (water/gas) with temperature sensor
10 liter rotor: maximum speed 13200 RPM, 13830 RCF
8 liter rotor: maximum speed 16000 RPM, 17888 RCF
Ra. less than 0.2 μm. Pharmaceutical grade teflon in valves and connections
Metal parts not in contact with the product and clean medias (in case if the design allows) stainless steel AISI304, Ra. less than 0.4 μm
Power supply: 3 phase, 400 V, 50 Hz/ 3 phase, 208 V, 50 Hz
Technical Sepcification
| Parameter | Value |
|---|---|
| Rotor inner diameter | 125-140 mm |
| Effective length | 750 mm |
| Rotor inner volume | 8-10 liter |
| Max. rotor speed | 16,000 rpm Maximum |
| Separation force | 18,000 g Maximum |
| Injection nozzle diameter adjustable range | 0.5 mm to 8.5 mm |
| Injection pressure | 0.5 to 1.5 bar |
| Flow | Determined by injected fluid type |
| Motor type | Direct coupled permanent magnet DC motor |
| Machine dimension | 75 cm * 75 cm * 160 cm |
| Machine weight | 480 kg |
| Motor specifications | 4 kW/10 A/ three phase (convertible to 32 A/single phase by transformer) |
Control and Monitoring System Specifications
- Portable stainless steel monitoring cabinet (optional).
- Rotational speed monitoring, control and recording.
- Monitoring and recording the product temperature.
- Live displaying all sensors data and graphical display of control logics.
- Process time control and recording.
- Process information (batch number, operator number, Equipment ID,…) registration.
- Vibration measurement, monitoring and recording system, alarm and trip.
- Saving operation log file.
- Three access levels for equipment control (operator, maintenance/technology engineer, administrator).
- Batch report in unchangeable format.
- Exporting the record process data via a removable hard disk.
- Alarm and trip levels for process parameters.
- Emergency stop button.
- Electrical cabinet with IP54 protection.
Designed according to cGMP Health standards
- Contact surfaces are electropolished to less than 0.2 micron roughness.
- Contact surfaces are made of AISI 316L stainless steel.
- All O-rings and gaskets are made of vayton or EPDM that could be sterilized, against environmental bacteria to BL-1-LS level.
Designed according to cGMP Health standards
- Contact surfaces are electropolished to less than 0.2 micron roughness.
- Contact surfaces are made of AISI 316L stainless steel.
- All O-rings and gaskets are made of vayton or EPDM that could be sterilized, against environmental bacteria to BL-1-LS level.
Auxiliary Equipment and Accessories:
- Special rotor mounting equipment
- Inlet and outlet temperature sensors
- Rotor vibration measurement system
- Rotor table
- Teflon sheet stencil
- Tools kit